APP
您当前位置£º牛摩网 > 商学院 > 改装与维修 > 浏览文章

辞职5年£¬只为打造一台摩托车

作者£º复古摩托车 时间£º2019/4/4 14:15:43

Messner Moto是一个来自意大利的改装品牌£¬尽管他们是于2014年创立£¬在欧洲改装圈也只能算是初出茅庐的新品牌£¬但是一部耗费3年时间打造完成的作品£¬却充分将Messner Moto想要传达的品牌精神£¬以及他们的产品设?#21697;?#26684;做了最完美的诠释£¡

Mirko Mesner是Messner Moto的创立者£¬和这个业界里的许多人同样£¬他?#26377;?#23601;对汽车和摩托车充满了热情¡£2014年£¬Mirko Mesner毅然辞去了任职10年的IT行业工作£¬并将所有积蓄投入了他的梦想£¬也就是打造出一部拥有完美工程和设计的摩托车£¡

由于Mirko Mesner对于3D软件的操作非常熟悉£¬同时他也很努力的自学工业设计与机械工程£¬再加上他对于造型的独到?#26639;Ğ£?#22240;此当Messner Moto在创立之?#37322;?#20986;了一系列以CNC方式切削制作的改装零件后£¬很快就让这个?#38470;?#21697;牌在欧洲引起改装玩家的瞩目¡£不过真正为Messner Moto打响名号的重要功臣£¬则是这部改装自70年代Honda CB750的作品£¡

问世于1969年的Honda初代CB750£¬在今日早已成为收藏家和老车爱好者眼中的瑰宝£¬因此谈到了CB750£¬许多人联想到的不是经典两字£¬就是它充满70年代风格的典雅外型¡£但是这部代表著Messner Moto一号机的镇店之作£¬却完全颠覆了CB750原本的样貌£¬而且在大量CNC零件武装下£¬不仅巧妙平衡了经典与现代两种元素£¬更成功传达出Messner Moto¡¸让完美的工程和设计并存¡¹的品牌精神£¡

这部车的外型显然是走向60年代的Cafe Racer路线£¬但是在许多细节处£¬却又刻意利用现代化?#22336;?#26469;提升了CB750的性能£¬例如它使用了源自于Suzuki GSX-R750的倒叉£¬以及从80年代CB900F改造而来的单摇臂¡¢和KTM Adventure 1290R的4.5x18后轮毂与制动系统¡£

油箱¡¢?#37096;Ç¡?#20998;离?#36873;?#24320;关¡¢油门座和后?#24179;?#36367;都是以手工制作£¬仪表则是选用德国Motogedget品牌制品¡£隐藏在头灯支架内的前方向灯和嵌入副车架末端并结合方向灯功能的尾灯£¬也都是由Messner Moto所设计¡£引擎部份£¬除了曲轴箱两侧都加上散热鳍片装饰之外£¬缸内其实也已经换上10.5£º1的高压缩比活塞和高扬程凸?#31181;á£?#24182;以Mikuni RS34化油器来对应跃升至836cc的?#29260;?#37327;¡£

值得一提的是£¬Messner Moto为这部车导入的许多CNC零件£¬其实都可以在他们的官网上购买¡£例如适合搭配2006-2013年GSX-R 600和750倒叉£¬而以6082-T6铝合金制作的联板£¬以及引擎内的强化机油泵¡¢正时链张紧装置等£¬目前?#23478;?#32463;成为Messner Moto的量产化商品¡£

改装清单

Frame

  • Triple Top Tree for GSX-R Conversion is designed by MessnerMoto and it is CNC machined from 6082-T6 billet aluminum

  • Triple Bottom Tree for GSX-R Conversion is designed by MessnerMoto and it is CNC machined from 6082-T6 billet aluminum

  • Front forks came from GSX-R 750 2007

  • Brembo calipers with performance Brembo Series Oro brake discs

  • Front brake master cylinder is hidden below the tank

  • Steering shock is integrated with a custom holdero£î the frame below the bottom triple tree

  • Frame if shortened at the back and bracing for mono-shock conversion is added to the frame

  • Tail lights are integrated into rear frame tubes

  • Part of the frame, above the engine, can be disassembled and engine work can be done without taking out the engine from the frame

  • Rear fork is designed by MessnerMoto and it made from DOHC cb900 1981 fork with added bracing for mono-shock conversion

  • Rear mono-shock is OHLINS from Yamaha r1 2012. Spring of mono-shock is chrome plated

  • The rear brake caliper is taken from KTM Adventure 1290R including Brembo brake rotor

  • Carrier for the rear brake is designed by MessnerMoto and it is CNC machined from 6082-T6 billet aluminum

  • The frame is cleared of all unnecessary hinges and brackets

  • Rear wheel is 18¡°x4.5¡° sourced from KTM Adventure 1290R

  • Tire is 170/60zr18 Bridgestone BATTLAX BT-54

  • Front and rear drive sprockets are specially made to accept 525 chain and to be compatible with upgraded rear wheel

  • Front and rear fender are designed by MessnerMoto and both are 3D printed

  • Hidden carrier for front fender is made using 3D printing and it is reinforced with carbon tubes and stainless steel

Controls

  • Handlebars are designed by MessnerMoto and they are CNC machined from 6082-T6 billet aluminum

  • Control levers are designed by MessnerMoto and they are CNC machined from 6082-T6 billet aluminum

  • Mini Push Buttons for handlebars are designed by MessnerMoto and they are CNC machined from 6082-T6 billet aluminum

  • Throttle control is designed by MessnerMoto and it is laser cut and CNC machined

  • Rear-set Brackets for Tarozzi Rear sets are designed by MessnerMoto and they are CNC machined from 6082-T6 billet aluminum

  • All brake tubing and control cables are custom made for this project

Electrics

  • Motogedget m-unit v2.0 is center of the electrical system. M-unit is packed in a box below seat with two lithium batteries

  • Motogedget Motoscope Pro digital dashboard

  • Temperature, pressure and end other parameters of the engine are monitored using special gauges and information from gauges is displayedo£î Motoscope Pro

  • The front light is made of 45w LED unit integrated in aluminum metal-shaped headlight bucket designed by MessnerMoto

  • Turn signals are hidden inside of the front light bucket

  • Tail lights are designed by MessnerMoto and they are smartly integrated in rear frame tubes.

  • Tail lights are made using custom LED diodes and lenses

Power
  • Alternator, flywheel, and rectifier were sourced from Yamaha R1 2009

  • Alternator engine cover is modified to accept R1 stator

  • Lightened and balanced crankshaft

  • Stronger and lighter connecting rods

  • Forged pistons with an increased compression ratio 1:10.5

  • Increased engine displacement from 736cc to 836cc

  • Race Cut transmission gear

  • Reinforced primary and camshaft chains

  • Honda CB750 Cam Chain Tensioner - High Performance designed by MessnerMoto

  • Honda CB750 Primary Chain Tensioner High Performance designed by MessnerMoto

  • Ported and polished head

  • Hi-flow racing valves

  • Racing beehive valve springs

  • Racing camshaft CX-7 has 2mm more lifto£î intake and exhaust sides than stock camshaft

  • Hard-welded rocker arms

  • Optical multi-spark ignition

  • Mikuni RS34 racing carbs

  • Honda CB750 Oil Pump Rebuild Kit CNC ROTORS engineered by MessnerMoto and CNC machined from 4732 billet steel

  • Oil cooler fitted in front of the bike

Exhaust

  • All four exhaust pipes are hand-bent and designed by MessnerMoto

  • Handmade mufflers designed by MessnerMoto

  • Hidden exhaust mounting brackets

  • All parts of the exhaust system are made from 304 stainless steel

  • Tank, tail and headlight bucket are designed by MessnerMoto and they are metal-shaped from aluminum

  • Aluminum is left uncovered with brushed finish

  • The tail is a functional oil tank for engine dry sump oiling system

  • Front light holders are 3D printed and reinforced with stainless steel

  • Motoscope PRO is supported by hidden 3D printed holders

  • Mold for Seat foam is 3D printed

  • Upholstery was done using artificial black leather. Theo£îly visible MessnerMoto logo iso£î the seat

  • Custom designed side stand. When retracted it blends into the frame

  • Engine casings are vapor-blasted


编辑£ºTammy
分享到£º
关键字£ºCB750 本田 意大利

相关阅读

  • hello£¬我是Q板M8£¡

    hello£¬我是Q板M8£¡

    2015-10-09 5458 

    什么是驱动你前行的力量£¿ 什么是让你趋于完美的基因£¿ 又是什么让你成为别人的风向标£¿ 当科技的光芒在M8时尚的线条上跃动时£¬你的心中便有了答案¡£ 有M8£¬前?#26032;?#19978;无需理由£¡...[详细]

  • 打造与众不同的爱驹 本田CB1100改装

    打造与众不同的爱驹 本田CB1100改装

    2017-09-27 4193 

    CB1100车系在2017年迎来大改款£¬推出CB1100RS/EX£¬除了油箱造型变得更有肌肉线条£¬整体也更增添运动风格£¬日前台湾本田也宣布开?#23478;?#36827;17年款CB1100£¬MOTO TRON序创顺势推出了对应改装方案£¬让车主马上就能拥有一台与众不同...[详细]

  • 轻量出行£¡新大洲本田裂行125新姿态来袭

    轻量出行£¡新大洲本田裂行125新姿态来袭

    2017-02-28 31822 

    男人骨子里£¬?#21152;?#19968;股摩托车战斗情?#24120;?#31359;上骑行衣靴¡¢戴上头盔¡¢踏上战马¡¢轰开油?#29275;?#21435;跑的更快¡¢行的更远¡¢飞的更高¡£近日£¬新大洲本田 裂行125璀璨登场£¬激昂时速£¬表现不凡£¬以另一种姿态£¬俯冲你的激昂人生£¡ 犀利外观...[详细]

  • 为庆祝跨百万销量 湖南五羊-本田贺新春送大礼

    为庆祝跨百万销量 湖南五羊-本田贺新春送大礼

    2014-01-06 848 

    2013£¬五羊-本田跨百万销量啦£¡国内销售达85万台以上£¬年出口达15万台以上¡£摩友们的热爱是五羊-本田不断超越梦想的动力£¡ 为庆祝跨百万销量£¬湖南五羊-本田贺新春£¬送千元大礼£¡湖南地区的车友们有福了£¡ 活...[详细]

  • 本田2017款CBR250RR ABS 三种马力模式的入门大包围

    本田2017款CBR250RR ABS 三种马力模式的入门大包围

    2017-05-19 105657 

    入门大包围已成为兵家必争之地£¬HONDA自2015年底的东京车展首次展出名为Light Weight Super Sports Concept£¬但外届已一致认为这是新一代双缸HONDA CBR250RR£¬此车曝光后立即成为市场焦点£¬成为不少车迷引颈以待的作品...[详细]

  • 动力升级 运动时?#23567;ª¡?#26032;大洲本田超级锐箭SDH125-5

    动力升级 运动时?#23567;ª¡?#26032;大洲本田超级锐箭SDH125-5

    2012-07-08 5472 

               序号 项目...[详细]

¡¾收藏本文¡¿¡¾关闭窗口¡¿

栏目热门文章

本日 本周 本月

  • 最新专题
  • 2019机车音乐节
  • 2019?#26412;?#22269;际摩托车展览会
  • 五羊-本田2019营销服务峰会暨新品发布会
  • 凯越500X
  • 安全?#36842;?快乐过年
  • 2018 十大爆文
  • 升仕网红310评测汇总
  • 2018牛摩榜
  • 入门轻量级猛兽
º«¹ú·Ö·Ö²Ê©¶´